Electronic Surge Protection
Surge Protector ESP 120-5A
Application:
AC Power - Low Current
Type:
Combined Type 2-3
Current:
-
Phase:
Single Phase
Let through Voltage (Up):
400V
Voltage:
120V
In-line Resistance:
-
Installation:
Connect in-line with the power supply usually either within the equipment panel (or for CCTV cameras, in an enclosure close by), or on the fused connection that supplies equipment
Description:
Combined Type 2 and 3 tested protector (to BS EN 61643) for use on low
current (up to 5 or 16 A) single phase systems to protect connected electronic
equipment from transient overvoltages on the mains supply, e.g. fire/intruder
alarm panels. Protectors with /BX suffix come ready-boxed, to IP66, for use in
dirty or damp environments. Available for 90-150 Volts, 200-280 Volts and
232-350 Volts supplies. For use at boundaries LPZ 1 through to LPZ 3 to protect
sensitive electronic equipment.
Surge Protector ESP 120-16A
Application:
AC Power - Low Current
Type:
Combined Type 2-3
Current:
-
Phase:
Single Phase
Let through Voltage (Up):
600V
Voltage:
120V
In-line Resistance:
-
Installation:
Connect in-line with the power supply usually either within the equipment panel (or for CCTV cameras, in an enclosure close by), or on the fused connection that supplies equipment
Description:
Combined Type 2 and 3 tested protector (to BS EN 61643) for use on low
current (up to 5 or 16 A) single phase systems to protect connected electronic
equipment from transient overvoltages on the mains supply, e.g. fire/intruder
alarm panels. Protectors with /BX suffix come ready-boxed, to IP66, for use in
dirty or damp environments. Available for 90-150 Volts, 200-280 Volts and
232-350 Volts supplies. For use at boundaries LPZ 1 through to LPZ 3 to protect
sensitive electronic equipment.
Surge Protector ESP 240-5A
Application:
AC Power - Low Current
Type:
Combined Type 2-3
Current:
-
Phase:
Single Phase
Let through Voltage (Up):
680V
Voltage:
240V
In-line Resistance:
-
Installation:
Connect in-line with the power supply usually either within the equipment panel (or for CCTV cameras, in an enclosure close by), or on the fused connection that supplies equipment
Description:
Combined Type 2 and 3 tested protector (to BS EN 61643) for use on low
current (up to 5 or 16 A) single phase systems to protect connected electronic
equipment from transient overvoltages on the mains supply, e.g. fire/intruder
alarm panels. Protectors with /BX suffix come ready-boxed, to IP66, for use in
dirty or damp environments. Available for 90-150 Volts, 200-280 Volts and
232-350 Volts supplies. For use at boundaries LPZ 1 through to LPZ 3 to protect
sensitive electronic equipment.
Surge Protector ESP 240-16A
Application:
AC Power - Low Current
Type:
Combined Type 2-3
Current:
-
Phase:
Single Phase
Let through Voltage (Up):
680V
Voltage:
240V
In-line Resistance:
-
Installation:
Connect in-line with the power supply usually either within the equipment panel (or for CCTV cameras, in an enclosure close by), or on the fused connection that supplies equipment
Description:
Combined Type 2 and 3 tested protector (to BS EN 61643) for use on low
current (up to 5 or 16 A) single phase systems to protect connected electronic
equipment from transient overvoltages on the mains supply, e.g. fire/intruder
alarm panels. Protectors with /BX suffix come ready-boxed, to IP66, for use in
dirty or damp environments. Available for 90-150 Volts, 200-280 Volts and
232-350 Volts supplies. For use at boundaries LPZ 1 through to LPZ 3 to protect
sensitive electronic equipment.