Electronic Surge Protection
Surge Protector ESP PV Series
Application:
Solar Panel
Type:
-
Current:
0.5A
Phase:
-
Let through Voltage (Up):
<2kV
Voltage:
250V
In-line Resistance:
-
Installation:
Use on the DC side of the DC-AC inverter for protection against partial direct or indirect lightning strikes. ESP Type 1 AC mains protectors (e.g. ESP 415/III/TNS) are further required at the AC side of the DC-AC inverter.
Description:
Combined Type 1 and 2 tested protector (to BS EN 61643) for a Photovoltaic
PV solar panel system that is on a building where a structural Lightning Protection System (LPS) is employed, for equipotential bonding. For use at boundaries up to LPZ 0 to protect against flashover (on the DC side of the DC-AC inverter) through to LPZ 2 to protect the PV system from damage.